INfinity 510 Protocol Reference Guide - Sirit

Chapter 15 - Modem Namespace
modem.protocol.isoc.control.select_cmd_period
This variable controls how often a Select command is sent, when ISO-C
filtering is not enabled. The Select command is sent at the start of every N
inventory rounds.
If set to 0, the Select command is never sent before inventroy rounds. This
variable is overridden when the "auto_mac.enable" control variable is true
(default).
The following examples set to send a Select command every 1, 5, and 0 (do
not send) inventory rounds.
>>> modem.protocol.isoc.control.select_cmd_period=1
>>> modem.protocol.isoc.control.select_cmd_period=5
>>> modem.protocol.isoc.control.select_cmd_period=0
Type
Permissions
Data Type
var
guest=r,admin=rw
int
Default 0
Min 0
Max
INT_MAX
modem.protocol.isoc.control.session_id
This variable sets the ISO-C session to use for tag communication. The ISO-
C specification allows for up to four sessions to be used concurrently. A tag
stores state information for each session, so that a Reader in one Session
does not disrupt the tag state for another Reader using a different Session.
Type
Permissions
Data Type
Default
Enum
var
guest=r,admin=rw
enum
SESSION_2
SESSION_0 SESSION_1 SESSION_2 SESSION_3
188 INfinity 510 Protocol Reference Guide