INfinity 510 Protocol Reference Guide - Sirit

Chapter 14 - Antennas Namespace
antennas..conducted_power
This variable is the antenna port transmit power during CW (in tenths of
dBm). If this value is 0, the reader automatically calculates the transmit
power based on the advanced settings for the antenna. = 1 to 4.
The following example sets the transmit power for antenna number 1 to
29 dBm.
>>> antennas.1.conducted_power = 290
ok
Type
var
Permissions
Data Type
int
Default 0
Min 0
Max 330
Units
ddBm
guest=r,admin=rw
antennas..advanced.attenuation
This variable is the attenuation level (in tenths of dB) used to lower the
transmit power level on a port. = 1 to 4.
The following example sets the attenuation level of antenna number 1 to
75 ddB.
>>> antennas.1.advanced.attenuation = 75
ok
Type
var
Permissions
Data Type
int
Default 0
Min 0
Max 400
Units
ddB
guest=r,admin=rw
152 INfinity 510 Protocol Reference Guide