INfinity 510 Protocol Reference Guide - Sirit

Chapter 12 - Tag Namespace
tag.read_kill_pwd
This function reads a tag kill password. The parameters supported by this
function are:
tag_id (optional) – Indicates id of the tag from which to read the data.
pwd (optional) – Indicates the access password required to read a
locked tag (Gen 2 only).
antenna (optional) – Indicates the list of antennas on which the function
executes. If an antenna is not specified, all antennas will be tried until
the function succeeds or no more antennas are available.
The response to this function is the tag's kill password. If the kill password
is not available in a specific tag type, an error is returned.
The following example reads the kill password from tag
0x306800095EFDDF80000987A5:
>>> tag.read_kill_pwd(tag_id=0x306800095EFDDF80000987A5)
ok kill_pwd=0x0D19F572
Type
Permissions
Parameters
function
guest=x,admin=x
tag_id (array)
pwd (array)
antenna (list)
116 INfinity 510 Protocol Reference Guide