INfinity 510 Protocol Reference Guide - Sirit

Chapter 5 - Embedded Reader Applications
LOADING APPLICATION CODE ONTO THE READER
File Format
Requirements
Embedded reader
application files must
be in Unix format.
Open a Windows
command prompt and
use the dos2unix
command. Navigate to
the file location and
perform the file
conversion.
The INfinity 510’s embedded web interface provides a mechanism to
transfer application files onto the reader. You can access the web interface
from RST. Perform the following:
1 From the RST main screen, press Configure. The INfinity 510 Reader
Configuration Tool (RCT) is displayed.
2 Under Advanced Function, select User Application Management.
3 Under Application Transfer, browse to the file and select Transfer File.
4 The application is transferred to the reader.
INfinity 510 Protocol Reference Guide 37