INfinity 510 Protocol Reference Guide - Sirit

Chapter 12 - Tag Namespace
tag.read_tid
This function reads a tag TID. The parameters supported by this function
are:
tag_id (optional) – Indicates the id of the tag from which to read data.
pwd (optional) – Indicates the access password required to read a
locked tag (Gen 2 only).
antenna (optional) – Indicates the list of antennas on which the function
executes. If an antenna is not specified, all antennas will be tried until
the function succeeds or no more antennas are available.
The response to this function is the tag TID data. If the TID data is not
available in a specific tag type, an error is returned.
The following example reads the TID data from tag
0x306800095EFDDF80000987A5:
>>> tag.read_tid(tag_id=0x306800095EFDDF80000987A5)
ok tid=0xE2001040
Type
Permissions
Parameters
function
guest=x,admin=x
tag_id (array)
pwd (array)
antenna (list)
INfinity 510 Protocol Reference Guide 117