INfinity 510 Protocol Reference Guide - Sirit

Chapter 8 - Setup Namespace
setup.install_type
This variable configures the reader for the type of installation. Based on the
install_type, Distance, Power and Modulation Depth are set in the reader.
The following example configures the reader for portal operation:
>>> setup.install_type = portal
ok
Type
Permissions
Data Type
Default
Enum
var
guest=r,admin=rw
enum
PORTAL
PORTAL CONVEYOR_BELT POINT_OF_SALE LABEL_APPLICATOR
VEHICLE SHELF_READER
setup.operating_mode
This variable configures the reader to read continuously (active mode), or to
wait for individual tag read commands (standby mode). Note that
autonomous and polled modes are left for backwards compatibility but are
really synonymous with Active.
The following example configures the reader to run continuously:
>>> setup.operating_mode = active
ok
Type
Permissions
Data Type
Default
Enum
var
guest=r,admin=rw
enum
Standby
Autonomous Polled Standby Active
INfinity 510 Protocol Reference Guide 67