INfinity 510 Protocol Reference Guide - Sirit

Chapter 15 - Modem Namespace
modem.protocol.isoc.control.user_data_offset
This specifies the word offset in user_memory data on the ISO-C tag at
which to start reads for inventory operations or with tag.read_user_data, or
writes with tag.write_user_data (). This is a global variable applied to all ISO-
C tags, and is used by functions such as tag.read_user_data() and
tag.write_user_data(). The default value of 0 causes the read/write to start
at offset 0 in the user_memory. This variable should be used in conjunction
with user_data_length to specify the portion of user_memory to be read. If
the offset+length exceeds the tag's memory space then the read will fail.
Type
Permissions
Data Type
var
guest=r,admin=rw
int
Default 0
Min 0
Max
INT_MAX
modem.protocol.isoc.control.verify_write
This variable enables read back verification of ISOC writes. When set to
true, a read command is issued following a write to verify the write success.
When set to false, no read back is performed.
Type
Permissions
Data Type
Default
var
guest=r,admin=rw
bool
True
modem.protocol.isoc.control.antenna..session_id
This variable contains the session_id setting for ISO-C commands used on
this antenna, when enable_per_antenna is set to TRUE.
Type
Permissions
Data Type
Default
Enum
var
guest=r,admin=rw
enum
SESSION_1
SESSION_0 SESSION_1 SESSION_2 SESSION_3
INfinity 510 Protocol Reference Guide 191