INfinity 510 Protocol Reference Guide - Sirit

Chapter 15 - Modem Namespace
modem.protocol.isoc.control.mem_bank_for_selection
This variable is the memory bank that Select command applies to perform
filtering.
Type
Permissions
Data Type
Default
Enum
var
guest=r,admin=r
enum
MEMBANK_EPC
MEMBANK_RSVD MEMBANK_EPC MEMBANK_TID
MEMBANK_USER
modem.protocol.isoc.control.number_slots_q
This variable sets the initial number of slots in inventory round. The initial
number of slots is the Q value from the ISO-C spec, where the number of
slots is equal to 2 to the Q power. This variable is overridden when the
"auto_mac.enable" control variable is true (default).
To set the number of slots to 1, set number_slots_Q = 0. To set the
number of slots to 2, set number _slots_Q = 1.
Type
var
Permissions
Data Type
int
Default 4
Min 0
Max 15
guest=r,admin=rw
modem.protocol.isoc.control.query_sel
This variable sets the ISO-C sel used by the initial Query command. If set to
0, the value used in the Query is predetermined. For finer control this
variable allows for specific sel values to be sent: 1 - All tags respond to
Query, 2 - All tags respond to Query, 3 - Tags with negated SL flag respond
to Query, 4 - Tags with asserted SL flag respond to Query.
Type
Permissions
Data Type
var
guest=r,admin=rw
int
Default 0
Min 0
Max 4
186 INfinity 510 Protocol Reference Guide