CIMCO CNC-Calc v2.5 User Guide
CIMCO CNC-Calc v2.5 User Guide
CIMCO CNC-Calc v2.5 User Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
69<br />
14. Tutorial 6<br />
Drilling<br />
<strong>CNC</strong>-<strong>Calc</strong> v2 can generate codes for drilling in either canned cycles or as longhand.<br />
There are several machine types in <strong>CNC</strong>-<strong>Calc</strong>, but the most commonly used are ISO<br />
G-code programming and Heidenhain plain text.<br />
14.1. Before you start<br />
The first thing to do before drawing a new part is to set the menu parameters. Start<br />
<strong>CIMCO</strong> Edit 5 and select Setup > Show Toolbars. Make sure all toolbars are<br />
displayed as shown in the image below. Toolbars can also be displayed or hidden by<br />
right-clicking on the toolbar area.<br />
To open a drawing click on <strong>CNC</strong>-<br />
<strong>Calc</strong> in the menu and then on Open<br />
Drawing.<br />
Alternatively the same can be<br />
achieved by clicking on the folder<br />
icon in the toolbar.