CIMCO CNC-Calc v2.5 User Guide

More documents

Recommendations

Info

75 Your screen should now look like the following. The text is now showing in the drawing and its geometry can now be used for generating the toolpaths. Select the file type (NC Format) for our example letter milling program (e.g. ISO Milling).
76 Select the feature Letter Milling by clicking the CNC-Calc Calc menu, then Millng Operations, Mill Letters, or select the corresponding icon from the Milling Operations toolbar. The dialog Letter Milling will appear on the left side of the screen as shown above. Further, you should also click on the Parameters button to define e.g. retract height over the part surface. For this example we chose a 2 mm. retract height, see below.
Page 1 and 2: www.cimco-software.com CIMCO CNC-Ca
Page 3 and 4: 28 9.1. Before you start The first
Page 5 and 6: 30 9.2. Draw the geometry Draw a re
Page 7 and 8: 32 Create a fillet between elements
Page 9 and 10: 34 Connect the inner elements Activ
Page 13 and 14: 38 10.2. Creation of Facing toolpat
Page 15 and 16: 40 Now close the parameters dialog
Page 17 and 18: 42 The line for the NC program is n
Page 21 and 22: 46 11.2. Creation of Contour toolpa
Page 23 and 24: 48 Side cuts are the cuts taken in
Page 25 and 26: 50 Lead in/out parameters describe
Page 27 and 28: 52 Click on Export Clipboard to cop
Page 31 and 32: 56 12.2. Creation of Pocket toolpat
Page 33 and 34: 58 At All Depths: If this check box
Page 35 and 36: 60 Lead in/out parameters describe
Page 37 and 38: 62 13. Tutorial 5 Backplot in the E
Page 39 and 40: 64 13.2. The first backplot When yo
Page 41 and 42: 66 After the tools have been config
Page 43 and 44: 68 Now everything has been configur
Page 45 and 46: 70 Select the file from CNC-Calc Ca
Page 47 and 48: 72 For the selection of the locatio
Page 49: 74 Once the toolbars have been sele
Page 53 and 54: 78 To verify the generated toolpath
Page 55 and 56: 80 16. Tutorial 8 Milling of TrueTy
Page 57 and 58: 82 In the bottom field you write th
Page 59 and 60: 84 The Letter Milling dialog has no
Page 61 and 62: 86 16.2. Pocket milling letters The
Page 63: 88 Verifying the toolpaths using th

CIMCO CNC-Calc v2.5 User Guide

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?