Classical & Heritage lighting - Indal

Chartres
The Chartres bracket is available in three outreaches, in wall or column mounting bracket , in a single arm
bracket and in a double or triple arm bracket. The bracket is made of metallised steel with a square
cross-section, in a polyester powder coating finish in RAL or Futura Akzo Nobel colours.
S
E
H
R
Wall or column
mounting bracket
Single arm bracket
Double arm bracket
> Chartres bracket versions and configurations p. 274
DIMENSIONS
Outreach (S) 600mm 800mm 1,000mm
Height (H) 1,100mm 1,240mm 1,660mm
Rise (R) 725mm 850mm 1,260mm
Fixing centre (E) 350mm 420mm 1,000mm
WEIGHT AND SCx
Weight 1 and 2 arms 12kg and 16kg 14kg and 18kg 16kg and 22kg
SCx 1 and 2 arms 0.07m 2 and 0.11m 2 0.08m 2 and 0.12m 2 0.12m 2 and 0.18m 2
MOUNTINGS
Column bracket mounting by tenon (CABR) Ø 49mm
Suspended bracket mounting, screwed fitting Ø 27 pdg (3/4’’ G)
Luminaire tilt angle at 0°
> Installation example with the Chartres bracket p. 119
> Bracket mountings p. 269
Brackets • page 161