Classical & Heritage lighting - Indal

Briare
versions & Dimensions
350 350
350 350
450
BRIARE
CL25 S
MATERIALS
450
650
crown
canopy crown
lyre
650
BRIARE
BRIARE
BRIARE
CL25 S CL25 + LYRE P
CL25 + LYRE P
crown embellishments
canopy
frame
bowl
- Housing in two materials copper & bronze:
. crown, canopy and frame in copper.
. crown embellishments and canopy crown in bronze.
. lyre in metallised steel.
- Control gear mounting plate in galvanised steel.
- Flat Reflector in galvanised steel.
- ExaCT Performer reflector in bright dipped anodised stamped aluminium.
- Optic gasket in EPDM, EPDM foam gasket between the frame and the
canopy.
- Bowl in polycarbonate (PC) or shock-resistant polymethacrylate (PMMA).
FINISHES
- Copper & bronze: untreated; antique patinated; varnished antiqued; clear
varnished.
- Flat Reflector: polyester powder coating finish in RAL 9010 white.
- Clear bowl.
> Materials & finishes on p. 206
RECYCLING
The housing of the luminaire (excluding the optical unit) is assembled
without glue, which makes recycling easier.
MOUNTING
- Suspended mounting using a threaded spigot in galvanised steel
Ø 27 pdg (3/4’’ G).
- Post top lyre mounting using a screwed fitting Ø 27 pdg (3/4’’ G).
> Luminaire mounting on p. 269
Installation & maintenance
- Luminaire opening without tools, by two brass ball-type locks located
between the frame and the canopy. The luminaire is opened by tilting the
canopy in the post top version and the frame in the suspended version.
- Luminaire maintains in open position by means of a stainless steel cable.
- Electrical connection by terminal strip for a flexible power cable with
3G 2.5 maximum cross-sectional area.
- Lamp access without tools, after opening the luminaire and opening the
cams for Flat Reflector or by one clip for ExaCT Performer.
- Control gear access after opening the luminaire. Mounting plate
unlocked by opening the cams for Flat Reflector or using two M6 Torx
screws for ExaCT Performer.
- Bowl replacement (including reflector) directly after opening the
luminaire, the reflector being held by clamps.
Mechanical and electrical specifications
Ingress protection (optic) IP 66
Ingress protection (control gear) IP 44
Class
I & II
Impact resistance (shock-resistant PMMA) IK 10
Max. weight with control gear
8 kg
SCx 0.05 m²
LAMPS, OPTICS & CONTROL GEAR
Briare CL 25
Type Shape Lamp holder Flat Reflector ExaCT Performer
SE High pressure sodium E27 ≤ 70W 70 W -
ME Ceramic metal halide E27 ≤ 70W 70 W -
MT Ceramic metal halide G12 - 50 to 150W
MT Cosmopolis PGZ12 - 45 to 140W
> Information optics on p. 265
- Ferromagnetic or electronic control gear depending on the version.
- Dimming and Control & Monitoring available on request.
Classical & Heritage • page 216