Classical & Heritage lighting - Indal

Precinct
versions & Dimensions
450
1050
940
940
450
450
1050
450
FINISHES
- Aluminium & stainless steel: polyester powder coating finish in RAL
or Futura Akzo Nobel colours. RETROLED engine in textured black.
- Clear bowl.
RECYCLING
The housing of the luminaire (excluding the optical unit) is assembled
without glue, which makes recycling easier.
PRECINCT CL65-16"
Star type
PRECINCT CL65-16" P
PRECINCT CL65-16" P
Precinct CL 65-16’’ is available with RETROLED technology.
étrier type étoile
étrier Frog 4
> RETROLED technology on p. 264
MATERIALS
crown
canopy
embellishments
bowl
- Housing in two materials aluminium & stainless steel:
Precinct CL 65 16’’
Versions Crown Canopy Embellishments Frame Frog
Aluminium /
stainless steel
aluminium stainless
steel
- Bowl in polycarbonate (PC).
PRECINCT CL65-16"
Frog 4
bronze
canopy
frame
frog
Conventional sources
- Control gear mounting plate in galvanised steel.
- Reflector in bright dipped anodised stamped aluminium.
(with bowl)
- Control gear mounting plate in aluminium sheet.
- Housing of RETROLED engine in extruded aluminium.
- Lenses in PMMA.
- Optic gasket in EPDM foam.
stainless
steel
metallised
steel
(Frog 4) or
aluminium
(star type
frog and
Solid Frog)
MOUNTING
- Top mounting star type for threaded spigot Ø 27 pdg (3/4’’ G).
- Top mounting Frog 4 or Solid Frog for column top Ø 76mm using three
M8 Allen head grub screws.
> Luminaire mounting on p. 269
Installation & maintenance
- Luminaire opening without tools, by using a latch located between the
frame and the canopy. The luminaire is opened by tilting the canopy.
- Luminaire maintains in open position by means of a stainless steel cable.
- Lamp access without tools, after opening the luminaire and quarter turn
unlocking of the lamp holder support.
Conventional sources
- Electrical connection by terminal strip for a flexible power cable with
3G 2.5 maximum cross-sectional area.
- Control gear access without tools, after opening the luminaire. Mounting
plate unlocked manually using two thermoplastic slotted screws Ø 4mm.
- Bowl replacement (including reflector) without tools directly after
opening the luminaire, the reflector being held by clamps.
- Electrical connection by a traditional Wieland three pin-connector for
a flexible power cable with a cross-sectional area of 2 x 1,5 or 3G 1,5.
- LED engine access after opening the luminaire, by unlocking the
RETROLED engine using four M4 Torx screws. Mounting plate removed
manually using one clip.
- LED engine replacement possible on location.
Mechanical and electrical specifications
Conventional RETROLED
Ingress protection (optic) IP 66 IP 66
Ingress protection (control gear) IP 44 IP 44
Class I & II I
Impact resistance (PC) IK 10 IK 10
Max. weight with control gear 10 kg 13 kg
SCx 0.30 m² 0.30 m²
Classical & Heritage • page 256