Classical & Heritage lighting - Indal

Senlis
The Senlis bracket is available in two outreaches, in wall or column mounting bracket, in a single arm bracket
and in a double or triple arm bracket. The bracket is made of metallised steel with a square cross-section, in a
polyester powder coating finish in RAL or Futura Akzo Nobel colours. The top of the bracket can be customised
with a cap.
S
E
H
R
Wall or column
mounting bracket
Single arm bracket
Double arm bracket
> Senlis bracket versions and configurations p. 275
DIMENSIONS
Outreach (S) 700mm 1,000mm
Height (H) 535mm 750mm
Rise (R) 65mm 220mm
Fixing centre (E) 420mm 490mm
WEIGHT AND SCx
Weight 1 and 2 arms 9kg and 17kg 14kg and 22kg
SCx 1 and 2 arms 0.06m2 and 0.1m2 0.1m2 and 0.17m2
MOUNTINGS
Column bracket mounting by tenon (CBR) Ø 49mm
Suspended bracket mounting, screwed fitting Ø 27 pdg (3/4’’ G)
Luminaire tilt angle at 0°
> Installation example with the Senlis bracket p. 95
> Bracket mountings p. 269
Classical & Heritage • page 164