Classical & Heritage lighting - Indal

Wy
The Wy bracket is available in three outreaches, in wall or column mounting bracket, in a single arm bracket,
a double or up to a four arm bracket. The bracket is made of metallised steel with a square cross-section, in a
polyester powder coating finish in RAL or Futura Akzo Nobel colours. The top of the bracket can be
customised with a cap.
S
E
H
R
Wall or column
mounting bracket
Single arm bracket
Double arm bracket
> Wy bracket versions and configurations p. 276
DIMENSIONS
Outreach (S) 450mm 750mm 1,000mm
Height (H) 730mm 1,050mm 1,050mm
Rise (R) 575mm 900mm 900mm
Fixing centre (E) 350mm 420mm 560mm
WEIGHT AND SCx
Weight 1 and 2 arms 7kg and 10kg 9kg and 14kg 11kg and 17kg
SCx 1 and 2 arms 0.05m 2 and 0.07m 2 0.08m 2 and 0.11m 2 0.09m 2 and 0.13m 2
MOUNTINGS
Column bracket mounting by tenon (CBR) Ø 49mm
Post top bracket mounting, threaded end Ø 27 pdg (3/4’’ G), or suspended bracket mounting, screwed fitting
Ø 27 pdg (3/4’’ G)
Luminaire tilt angle at 0°
> Installation example with the Wy bracket p. 95
> Bracket mountings p. 269
Brackets • page 167