Classical & Heritage lighting - Indal

Place d’Armes
The Place d’Armes bracket is available in three outreaches, in wall or column mounting bracket, in a single
arm bracket and double or triple arm bracket. The bracket is made of metallised steel with a square crosssection,
in a polyester powder coating finish in RAL or Futura Akzo Nobel colours. The top of the bracket can
be customised with a cap.
S
E
H
R
Wall or column
mounting bracket
Single arm bracket
Double arm bracket
> Place d’Armes bracket versions and configurations p. 275
DIMENSIONS
Outreach (S) 600mm 750mm 900mm
Height (H) 535mm 535mm 750mm
Rise (R) 405mm 405mm 550mm
Fixing centre (E) 380mm 380mm 420mm
WEIGHT AND SCx
Weight 1 and 2 arms 7kg and 11kg 8kg and 12kg 11kg and 18kg
SCx 1 and 2 arms 0.07m 2 and 0.12m 2 0.1m 2 and 0.18m 2 0.11m 2 and 0.19m 2
MOUNTINGS
Column bracket mounting by tenon (CBR) Ø 49mm
Post top bracket mounting, threaded end Ø 27 pdg (3/4’’ G), or suspended bracket mounting, screwed fitting
Ø 27 pdg (3/4’’ G)
Luminaire tilt angle at 0°
> Installation example with the Place d’Armes bracket p. 131
> Bracket mountings p. 269
Classical & Heritage • page 166