Classical & Heritage lighting - Indal

Mounting
BRACKET MOUNTINg
Depending on the bracket model, it is possible to mount the luminaires in
post top (P) version or in suspended (S) version.
Luminaires in post top (P) version: threaded end Ø 27 pdg (3/4’’ G) or
smooth spigot Ø 60mm.
Luminaires in suspended (S) version: screwed fitting Ø 27 pdg (3/4’’ G)
or Ø 34 pdg (1’’ G). Only the Louise luminaire is with a screwed fitting
Ø 42 pdg (1’’1/4 G) or Ø 34 pdg (1’’ G).
Female/female or male/male swivel joint connector
The swivel joint connector is an interfacing part between the luminaire
and the bracket, which ensures the vertical position of a suspended
luminaire (+ or - 5°).
Male mounting: two threaded ends Ø 27 pdg (3/4’’ G) or Ø 34 pdg (1’’ G).
Female mounting: two sleeves Ø 27 pdg (3/4’’ G) or Ø 34 pdg (1’’ G).
male/male swivel joint
Female/female swivel joint
Post top VERSION
Threaded Embout fileté end
Ø 27 pdg (3/4’’G)
Embout fileté
Ø 27 pdg (3/4’’G)
SUSPENDED VERSION
Embout fileté
Ø 27 pdg (3/4’’G)
Smooth spigot
Ø 60mm
+/-5°
+/-5°
+/-5° +/-5° +/-5° +/-5°
Male/female swivel joint connector
The swivel joint connector is an interfacing part between the luminaire
and the bracket, which ensures the vertical position of a suspended
luminaire (+ or - 5°).
Male mounting: threaded ends Ø 27 pdg (3/4’’ G).
Female mounting: sleeves Ø 27 pdg (3/4’’ G) or Ø 34 pdg (1’’ G).
Raccord taraudé
Ø 27 pdg (3/4’’G)
Raccord taraudé
Ø 27 pdg (3/4’’G)
Raccord Screwed taraudé fitting
Ø 27 pdg (3/4’’G)
+/-5°
+/-5° +/-5°
AD1 and AD2 adaptors
AD1 and AD2 adaptors can adapt brackets for threaded end Ø 27 pdg (3/4’’ G)
to luminaires of Ø 34 pdg (1’’ G) and vice-versa. These adaptors also allow
the mounting system to be extended in order to ensure that the luminaire
is not too close to the bracket.
Raccord Screwed taraudé fitting
Ø 34 pdg (1’’G)
AD1
AD2
Raccord taraudé
Ø 34 pdg (1’’G)
Raccord taraudé
Ø 34 pdg (1’’G)
Technical information • page 269