Classical & Heritage lighting - Indal

Luminaire accessories
PENDANT MOUNTING (CAT)
The moulded aluminium mounting piece allows pendant mounting lighting
installations. It makes it possible for all luminaires of the range that offer
pendant mounting for threaded end Ø 27 pdg (3/4” G) or Ø 34 pdg (1” G).
anti-Glare shield
In order to prevent glare or light pollution, some luminaires can be fitted
with one or several anti-glare shields. This painted steel light blocking part
is installed either in the bowl or between the bowl and the housing of the
luminaire.
SUSPENSION CHAIN & FIXED SUSPENSION MOUNTING
Suspension chain allows the luminaire to be directly mounted under a
ceiling or arch (mounting on a hook by means of a shackle).
Minimum length of the chain: 150mm.
Luminaire mounting for threaded end Ø 27 pdg (3/4” G).
Fixed suspension allows a luminaire to be mounted directly under a ceiling
or arch (mounting by screw).
Minimum length of the pipe: 250mm.
Luminaire mounting for threaded end Ø 27 pdg (3/4” G).
FLOODLIGHT
Specially for lighting facades or vegetation, the Hôtel de Ville CL 451,
Concorde CL 452, Parvis CL 44 and Chantilly CL 44 luminaires can be fitted
with an additional small floodlight in the top of the luminaire.
The floodlight can be directly accessed after opening the luminaire.
You will find the different floodlights specifications in the table below.
Pyrex window
SUSPENSION CHAIN
FIXED SUSPENSION
Floodlight
Floodlight Lamp Wattage Lamp holder
Parvis CL 44 & Chantilly CL 44
Floodlight fitted
in the lamp
MT 35W E27
Symmetrical
rectangular floodlight
MT 70W RX7s
Hôtel de Ville CL 451 & Concorde CL 452
Symmetrical
rectangular floodlight
MT up to 150W RX7s
Classical & Heritage • page 268