Classical & Heritage lighting - Indal

Windsor
The Windsor bracket is available in two outreaches for wall or column mounting versions and in a single
or double arm bracket mounting. The bracket is made of moulded aluminium, in a polyester powder coating
finish in RAL or Futura Akzo Nobel colours.
S
E
H
R
Wall mounting bracket
Single arm bracket
Double arm bracket
> Windsor bracket versions and configurations p. 276
DIMENSIONS
Outreach (S) 470mm 1,000mm
Height (H) 475mm 475mm
Rise (R) 200mm 300mm
Wall fixing centre 2 pt and 3 pt (E) 145mm 110 x 310mm
Column fixing centre 2 pt 145mm 220mm
WEIGHT AND SCx
Weight 1 and 2 arms 4kg and 6kg 10kg and 17kg
SCx 1 and 2 arms 0.06m 2 and 0.1m 2 0.14m 2 and 0.25m 2
MOUNTINGS
Outreach of the bracket 470mm for post top mounting with spigot Ø 60 x 110mm
Outreach of the bracket 1,000mm for suspended mounting Ø 89mm by tenon (NDBR6 Ø 60mm)
Post top bracket mounting (outreach 470mm), spigot Ø 60mm
Suspended bracket mounting (outreach 1,000mm), screwed fitting Ø 34 pdg (1’’ G)
Luminaire tilt angle at 0°
> Installation example with the Windsor bracket p. 153
> Bracket mountings p. 269
Brackets • page 181