Classical & Heritage lighting - Indal

Palace
versions & Dimensions
540
540
540
540
FINISHES
- Aluminium & stainless steel: polyester powder coating finish in RAL or
Futura Akzo Nobel colours. RETROLED engine in RAL 9010 white.
- Clear bowl.
1010
970
1010
970
RECYCLING
The housing of the luminaire (excluding the optical unit) is assembled
without glue, which makes recycling easier.
PALACE CL64
Frog 6
Palace CL 64 is available with RETROLED technology.
> RETROLED technology on p. 264
MATERIALS
crown
canopy
embellishments
bowl
- Housing in two materials aluminium & stainless steel:
Palace CL 64
Versions Crown Canopy Embellishments Frame Frog
Aluminium /
stainless steel
aluminium stainless
steel
- Bowl in polycarbonate (PC).
PALACE CL64
Star PALACE typeCL64
Frog 6
PALACE CL64
Star type
canopy
frame
frog
cupro-aluminium stainless
steel
Conventional sources
- Control gear mounting plate in galvanised steel.
- Reflector in bright dipped anodised stamped aluminium.
(with bowl)
- Control gear mounting plate in aluminium sheet.
- Housing of RETROLED engine in moulded aluminium.
- Lenses in PMMA.
- Optic gasket in EPDM foam.
metallised
steel
(Frog 6)
or
aluminium
(star type
frog)
MOUNTING
- Top mounting star type for threaded spigot Ø 27 pdg (3/4’’ G).
- Top mounting Frog 6 for column top Ø 60mm x 100mm using three M8
Allen head grub screws.
> Luminaire mounting on p. 269
Installation & maintenance
- Luminaire opening without tools, using two latches located between the
frame and the canopy. The luminaire is opened by tilting the canopy.
- Luminaire maintains in open position by means of a steel cable.
- Lamp access without tools, after opening the luminaire and quarter turn
unlocking of the lamp holder support.
Conventional sources
- Electrical connection by three connectors for a flexible power cable with
a cross-sectional area of 3G 2.5 maximum.
- Control gear access without tools, after opening the luminaire. Mounting
plate unlocked manually using two M6 slotted screws.
- Bowl replacement (including reflector) directly after opening the
luminaire, the reflector being held by clamps.
- Electrical connection by a traditional Wieland three pin-connector for
a flexible power cable with a cross-sectional area of 2 x 1,5 or 3G 1,5.
- Control gear access without tools, after opening the luminaire, the
mounting plate being fixed to the housing of the RETROLED engine.
Mounting plate unlocked manually using one clip.
- LED engine replacement possible on location.
Mechanical and electrical specifications
Conventional RETROLED
Ingress protection (optic) IP 66 IP 66
Ingress protection (control gear) IP 44 IP 44
Class I & II I & II
Impact resistance (PC) IK 10 IK 10
Max. weight with control gear 14 kg 18 kg
SCx 0.39 m² 0.39 m²
Technical information • page 247