Classical & Heritage lighting - Indal

700
600
580
BEAUGENCY
CL175 P
470
BEAUGENCY
CL165 P
Beaugency
versions & Dimensions
700
600
700
470
BEAUGENCY
CL165 + LYRE S
470580
840
700
700
580
BEAUGENCY
CL175 + LYRE S
580
700
840
BEAUGENCY
BEAUGENCY
BEAUGENCY
CL165 P
CL175 P
CL165 + LYRE S
BEAUGENCY
BEAUGENCY
BEAUGENCY
Beaugency BEAUGENCY CL175 CL 175 P is available CL165 with + RETROLED LYRE S technology.
CL175 + LYRE S
> RETROLED CL175 technology S on p. 264
470
470
580
840
(with bowl)
- Control gear mounting plate in aluminium sheet.
- Housing of RETROLED engine in moulded aluminium.
- Lenses in PMMA.
- Optic gasket in EPDM foam.
FINISHES
- Aluminium & stainless steel: polyester powder coating finish in RAL or
Futura Akzo Nobel colours. RETROLED engine in RAL 9010 white.
- Copper: untreated; antique patinated; varnished antiqued; clear varnished.
- Clear bowl.
580
> Materials & finishes on p. 206
RECYCLING
The housing of the luminaire (excluding the optical unit) is assembled
without glue, which makes recycling easier.
MOUNTING
BEAUGENCY
CL175 + LYRE - SSuspended lyre mounting using Ø 27 pdg (3/4’’ G) cast iron suspension kit.
- Top mounting star type for threaded spigot Ø 27 pdg (3/4’’ G).
> Luminaire mounting on p. 269
MATERIALS
lyre
canopy
bowl
BEAUGENCY
CL175 S
- Housing in copper or in two materials: BEAUGENCY aluminium & stainless steel or
copper & stainless steel. CL175 S
Beaugency CL 165 & CL 175
Versions Lyre Crown Canopy Frame
Copper metallised steel copper copper copper
Aluminium/stainless steel metallised steel aluminium aluminium stainless steel
Copper/stainless steel metallised steel copper copper stainless steel
- Bowl in shock-resistant polymethacrylate (PMMA).
suspension kit
crown
frame
Conventional sources
- Control gear mounting plate in galvanised steel.
- Reflectors in bright dipped anodised stamped aluminium (with bowl).
Installation & maintenance
- Luminaire opening without tools using two brass ball-type locks located
on the canopy.
- Luminaire opening by tilting the canopy in the post top version or the
frame in the suspended version.
- Luminaire maintains in open position by means of a stainless steel cable.
- Lamp access without tools, after opening the luminaire and opening the
cams for RFC optic or two clips for Vectra 1 or one clip for ExaCT Performer.
Conventional sources
- Electrical connection by terminal strip for a flexible power cable with
3G 2.5 maximum cross-sectional area.
- Control gear access after opening the luminaire. Mounting plate unlocked
by opening the cams for RFC or using two M6 Torx screws for Vectra 1 and
ExaCT Performer.
- Bowl replacement (including reflector) directly after opening the
luminaire.
- Electrical connection by a traditional Wieland three pin-connector for
a flexible power cable with a cross-sectional area of 2 x 1,5 or 3G 1,5.
- Control gear access without tools, after opening the luminaire, the
mounting plate being fixed to the housing of the RETROLED engine.
Mounting plate unlocked manually using one clip.
- LED engine replacement possible on location.
Classical & Heritage • page 210