Classical & Heritage lighting - Indal

Val de Loire
The Val de Loire bracket is available in one outreach, in wall or column mounting bracket, in a single arm
bracket, a double or triple arm bracket. The bracket is made of metallised steel with a square cross-section
adorned with a moulded aluminium decoration, in a polyester powder coating finish in RAL or Futura Akzo
Nobel colours. The top of the bracket can be customised with a cap.
S
E
H
R
Wall or column
mounting bracket
Single arm bracket
Double arm bracket
> Val de Loire bracket versions and configurations p. 275
DIMENSIONS
Outreach (S)
Height (H)
Rise (R)
Fixing centre (E)
WEIGHT AND SCx
750mm
560mm
390mm
350mm
Weight 1 and 2 arms
15kg and 25kg
SCx 1 and 2 arms 0.09m 2 and 0.16m 2
MOUNTINGS
Column bracket mounting by tenon (CBR) Ø 49mm
Post top bracket mounting, threaded end Ø 27 pdg (3/4’’ G), or suspended bracket mounting, screwed fitting
Ø 27 pdg (3/4’’ G)
Luminaire tilt angle at 0°
> Installation example with the Val de Loire bracket p. 59
> Bracket mountings p. 269
Classical & Heritage • page 170