Classical & Heritage lighting - Indal

Century
versions & Dimensions
495 495
495 495
770 770
770 770
CENTURY P
MATERIALS
canopy
arm
CENTURY P
CENTURY S
CENTURY S
upper reflector
diffuser
base
- Housing in aluminium.
- Control gear mounting plate in galvanised steel (Class I) or polyamide
(Class II).
- Reflector in bright dipped anodised stamped aluminium.
- Diffuser in polycarbonate (PC) and glass.
- Luminaire gasket in EPDM.
FINISHES
- Aluminium: polyester powder coating finish in RAL or Futura Akzo Nobel
colours.
- Upper reflector in RAL 9010 white.
- Diffuser in structured clear.
- Electrical connection by fast connection with safety plug for a flexible
power cable with a cross-sectional area of 3G 2.5 maximum with EPDM
grommet in the suspended version and ISO 20 cable gland in the post
top version.
- Lamp access after opening and removing the reflector.
- Control gear access after opening the canopy of the luminaire.
Mounting plate unlocked using two M6 hexagon head screws.
- Diffuser replacement by using four M6 HSHC screws located on the
diffuser support.
Mechanical and electrical specifications
Ingress protection (optic) IP 66
Ingress protection (control gear) IP 44
Class
I & II
Impact resistance (PC) IK 10
Max. weight with control gear
20 kg
SCx 0.13 m²
LAMPS, OPTICS & CONTROL GEAR
Century
Type Shape Lamp holder AD* SD*
MT Ceramic metal halide G12 50 to 150W 50 to 150W
MT Cosmopolis PGZ12 45 to 140W 45 to 140W
* AD: asymmetrical distribution / SD: symmetrical distribution.
- Ferromagnetic or electronic control gear depending on the version.
- Dimming and Control & Monitoring available on request.
RECYCLING
The housing of the luminaire (excluding the diffuser) is assembled
without glue, which makes recycling easier.
MOUNTING
- Post top mounting for spigot Ø 60mm x 100mm.
- Suspended mounting using a brass threaded spigot Ø 34 pdg (1’’ G).
Photometrics
100°
Luminaire Century
Optic
AD
Lamp MT-150
ULOR : 0.3 % DLOR : 31.6 %
90°
85°
100°
90°
100°
Luminaire Century
Optic
AD
Lamp MT-140
ULOR : 4.3 % DLOR : 33.4 %
90°
100°
90°
> Luminaire mounting on p. 269
80°
70°
80°
70°
80°
70°
40
80°
70°
Installation & maintenance
- Luminaire opening in the upper section using two M8 HSHC screws
located on the canopy; in the lower section using four M6 HSHC screws
located on the diffuser support.
- Luminaire maintains in open position after opening the canopy by
means of a locking runner.
60°
60°
60
80
45°
45°
100
cd/klm
30° 15° 0° 15° 30°
C0-C180 C85-C265 C90-C270
60°
60°
60
80
45°
45°
100
cd/klm
30° 15° 0° 15° 30°
C0-C180 C90-C270 C90-C270
Classical & Heritage • page 218