Classical & Heritage lighting - Indal

Léopold & Sablon
versions 430 & Dimensions
960
960
430
LÉOPOLD
CL60 P/S
LÉOPOLD
CL60 P/S
MATERIALS
crown
canopy crown
frog
1080
1080
610
610
SABLON
CL62 P/S
SABLON
CL62 P/S
canopy
frame
EP ball
- Housing in aluminium or in two materials copper & bronze:
Léopold CL 60
Versions
Crown
Crown &
canopy
Canopy
crown
Frame Frog EP ball
Aluminium - aluminium - aluminium aluminium brass
Copper/bronze - copper - bronze bronze brass
Sablon CL 62
bowl
Copper/bronze bronze copper bronze bronze bronze brass
- Control gear mounting plate in galvanised steel.
- Reflectors in bright dipped anodised stamped aluminium.
- Bowl in shock-resistant polymethacrylate (PMMA).
FINISHES
- Aluminium: polyester powder coating finish in RAL or Futura Akzo Nobel
colours.
- Copper & bronze: untreated; antique patinated; varnished antiqued;
clear varnished.
- Clear bowl.
> Materials & finishes on p. 206
RECYCLING
The housing of the luminaire (excluding the optical unit) is assembled
without glue, which makes recycling easier.
MOUNTING
- Top mounting bolt hole Ø 28mm.
- Suspended mounting using a threaded spigot in galvanised steel
Ø 27 pdg (3/4’’ G).
> Luminaire mounting on p. 269
Installation & maintenance
- Luminaire opening without tools, by using one M6 knurled knob located
between the frame and the canopy crown (Sablon), and the canopy
(Léopold). The luminaire is opened by tilting the canopy in the post top
version and the frame in the suspended version.
- Luminaire maintains in open position by means of a steel cable.
- Electrical connection by terminal strip for a flexible power cable with a
cross-sectional area of 3G 2.5 maximum.
- Lamp access without tools, after opening the luminaire and unlocked
manually by opening the cams for RFC or by quarter turn of the lamp
holder support for Arc 80-S.
- Control gear access without tools, after opening the luminaire. Mounting
plate unlocked manually using four M6 screws.
- Bowl replacement (including reflector) directly after opening the
luminaire, the reflector being held by clamps.
Mechanical and electrical specifications
Ingress protection (optic) IP 66
Ingress protection (control gear) IP 44
Class
I & II
Impact resistance (shock-resistant PMMA) IK 10
Max. weight with control gear:
CL 60 (aluminium)
12 kg
CL 60 (copper/bronze)
26 kg
CL 62 (copper/bronze)
35 kg
SCx: CL 60 0.12 m²
CL 62 0.18 m²
LAMPS, OPTICS & CONTROL GEAR
> Information optics on p. 265
Léopold CL 60 & Sablon CL 62
Type Shape Lamp holder RFC Arc 80-S
ST High pressure sodium
E27 ≤ 70W
E40 ≥ 100W
70 to 150W 70 to 150W
MT Ceramic metal halide
E27 ≤ 70W
E40 ≥ 100W
70 to 150W 70 to 150W
MT Ceramic metal halide G12 - 50 to 150W
MT Cosmopolis PGZ12 - 45 to 140W
Classical & Heritage • page 238