Classical & Heritage lighting - Indal

Jargeau 400
20
EAU
3 P/S
720
370
JARGEAU
CL114 P/S
versions & Dimensions
400
420
730
590
JARGEAU 400 JARGEAU
IJG P/S JARGEAUCL52 P/S JARGEAU JARGEAU 400
CL113 P/S CL114 P/S
IJG P/S
Jargeau 400 is available with RETROLED technology (IJE).
> RETROLED technology on p. 264
MATERIALS
crown
bowl
frog
320
770
720
370
- Housing in moulded aluminium.
- Bowl in polycarbonate (PC) or flat optical bowl in toughened glass (VV).
Conventional sources
- Control gear mounting plate in galvanised steel.
- Reflectors in bright dipped anodised and high purity hydroformed
aluminium.
- Luminaire gasket in EPDM.
730
400
canopy
frame
EP ball
770
420
JARGEAU
CL52 P/S
MOUNTING
- Top mounting for brass threaded spigot Ø 34 pdg (1’’ G) or Ø 27 pdg
(3/4’’ G).
- Post top mounting for column top Ø 60mm using adapting piece
AS Ø 60mm.
- Post top mounting for column top Ø 76mm using adapting piece
AS Ø 76mm.
- Suspended mounting using a brass threaded spigot Ø 34 pdg (1’’ G)
or Ø 27 pdg (3/4’’ G).
> Luminaire mounting on p. 269
Installation & maintenance
- Luminaire opening without tools using two quarter turn screws located
on the canopy. The luminaire is opened by tilting the canopy in the post
top version or the frame in the suspended version.
- Luminaire maintains in open position by means of a telescopic slider
with automatic unlocking.
- Lamp access without tools, after opening the luminaire. Lamp holder
support unlocked manually using closing cams (iReflec100 and
iReflec220) or two quarter turn screws (VRL).
Conventional sources
- Electrical connection to the power supply by terminal strip for a flexible
power cable with 3G 2.5 maximum cross-sectional area.
- Safe maintenance SMT: automatic disconnection switch on opening
(Class II).
- Control gear access without tools, after opening the luminaire. Control
gear mounting plate removed using two quarter turn screws.
- Optical unit replacement directly after opening the luminaire.
(without bowl)
- Control gear mounting plate in aluminium sheet.
- Housing of RETROLED engine in extruded aluminium.
- Lenses in PMMA.
- Optic gasket in EPDM foam.
FINISHES
- Aluminium: polyester powder coating finish in RAL or Futura Akzo Nobel
colours. RETROLED engine in textured black.
- Glass bowl: clear; polycarbonate bowl: clear or semi-opal.
RECYCLING
The housing of the luminaire (excluding the bowl) is assembled without
glue, which makes recycling easier.
- Electrical connection by a traditional Wieland three pin-connector for
a flexible power cable with a cross-sectional area of 2 x 1,5 or 3G 1,5.
- LED engine access after opening the luminaire, by unlocking the
RETROLED engine using four M4 Torx screws. Mounting plate removed
manually using one clip.
- LED engine replacement possible on location.
Mechanical and electrical specifications
Conventional RETROLED
Ingress protection (optic) IP 66 DIP* IP 66
Ingress protection (control gear) IP 66 DIP* IP 44
Class I & II I
Impact resistance
IK 09 (VV) and IK 10 (PC) IK 06 (lenses)
Max. weight with control gear 15.5 kg 18.5 kg
SCx 0.245 m² 0.245 m²
* DIP: double IP rating.
Technical information • page 231