Classical & Heritage lighting - Indal

Henri IV
versions & Dimensions
1010
MATERIALS
565
HENRI IV
CL40
ball
crown
canopy crown
frog
1010
565
HENRI IV
CL40
crown embellishments
canopy
frame
bowl
- Housing in two materials copper & bronze:
. crown and canopy in copper.
. ball, crown embellishments, canopy crown, frame and frog in bronze.
- Control gear mounting plate in galvanised steel.
- Reflector in bright dipped anodised stamped aluminium.
- Optic gasket in EPDM, EPDM foam gasket between the frame and the
canopy.
- Bowl in shock-resistant polymethacrylate (PMMA).
FINISHES
- Copper & bronze: untreated; antique patinated; varnished antiqued;
clear varnished.
- Clear bowl.
> Materials & finishes on p. 206
RECYCLING
The housing of the luminaire (excluding the optical unit) is assembled
without glue, which makes recycling easier.
MOUNTING
- Top mounting four bolt holes on Ø 85mm for M8 screw.
> Luminaire mounting on p. 269
Installation & maintenance
- Luminaire opening by using one M8 HSHC screw located between the
frame and the canopy crown. The luminaire is opened by rotating the
canopy around a hinge connecting the frame to the canopy.
- Luminaire maintains in open position by means of a prop.
- Electrical connection by terminal strip for a flexible power cable with
3G 2.5 maximum cross-sectional area.
- Lamp access without tools, after opening the luminaire and quarter turn
unlocking of the lamp holder support.
- Control gear access after opening the luminaire. Mounting plate
unlocked using four M6 Torx screws.
- Bowl replacement (including reflector) directly after opening the
luminaire, the reflector being held by clamps.
Mechanical and electrical specifications
Ingress protection (optic) IP 66
Ingress protection (control gear) IP 54
Class
I & II
Impact resistance (shock-resistant PMMA) IK 10
Max. weight with control gear
53 kg
SCx 0.33 m²
LAMPS, OPTICS & CONTROL GEAR
Henri IV CL 40
Type Shape Lamp holder Arc 80-S
ST High pressure sodium
E27 ≤ 70W
E40 ≥ 100W
70 to 150W *
MT Ceramic metal halide
E27 ≤ 70W
E40 ≥ 100W
70 to 150W *
MT Ceramic metal halide G12 50 to 150W
MT Cosmopolis PGZ12 45 to 140W
* 150W max. recommended. 250W on study.
> Information optics on p. 265
- Ferromagnetic or electronic control gear depending on the version.
- Dimming and Control & Monitoring available on request.
Technical information • page 229