Classical & Heritage lighting - Indal

Harmony Classique
versions & Dimensions
580
580
770
RECYCLING
The housing of the luminaire (excluding the canopy) is assembled
without glue, which makes recycling easier.
660
HARMONY CLASSIQUE
HAR-FDS-D10-VT
All the Harmony Classique versions are available with RETROLED
technology.
> RETROLED technology on p. 264
MATERIALS
upper crown CS
lower crown CI
660
580
HARMONY CLASSIQUE
660 HAR-FDS-D8-VT
HARMONY CLASSIQUE
HAR-FDS-D10-VT
1600
HARMONY CLASSIQUE
HAR-FLF-D10-VT
- Housing in moulded aluminium (strip) and spun aluminium (canopy).
- Bowl (VT) in polymethacrylate (PMMA) or shock-resistant polymethacrylate
(PMMA IK 10 clear bowl only).
- Accessories in moulded aluminium (CS and CI).
660
580
HARMONY CLASSIQUE
HAR-FDS-D8-VT
canopy
strip
bowl
1600
MOUNTING
770
- Suspended mounting using a brass threaded spigot Ø 34 pdg (1’’ G).
- Post top lyre mounting for column top Ø 90mm using 4 M8 HSHC screws.
> Luminaire mounting on p. 269
Installation & maintenance
- Luminaire opening by means of 4 M5 hexagon head screws in brass,
then by quarter turn rotation of the bowl.
- Bowl maintains in open position by means of a stainless steel cable
located between the housing and the bowl.
- Lamp access directly without tools, after opening the bowl.
Conventional sources
- Electrical connection by fast connection with safety plug and grommet for
HARMONY the CLASSIQUE suspended version or ISO 20 cable gland for the post top lyre version.
HAR-FLF-D10-VT Flexible power cable with a cross-sectional area of 3G 2.5 maximum.
- Control gear access after opening the luminaire. In Class I, control gear
plate unlocked without tools using two quarter turn wing screws; in Class
II, using two quarter turn screws.
- Bowl replacement after opening the luminaire and releasing the stainless
steel cable.
- Electrical connection by a traditional Wieland three pin-connector for
a flexible power cable with a cross-sectional area of 2 x 1,5 or 3G 1,5.
- Control gear access without tools, after opening the luminaire, the
mounting plate being fixed to the housing of the RETROLED engine.
Mounting plate unlocked manually using one clip.
- LED engine replacement possible on location.
Conventional sources
- Control gear mounting plate in polyamide.
- Reflectors in bright dipped anodised and high purity hydroformed aluminium.
- Luminaire gasket in felt.
(with or without bowl)
- Control gear mounting plate in aluminium sheet.
- Housing of RETROLED engine in moulded aluminium.
- Lenses in PMMA.
- Optic gasket in EPDM foam.
FINISHES
- Aluminium: polyester powder coating finish in RAL or Futura Akzo Nobel
colours. RETROLED engine in RAL 9010 white.
- Clear (VTC) or pearlized (VTP) bowl.
> Materials & finishes on p. 206
Mechanical and electrical specifications
Conventional RETROLED
Ingress protection (optic) IP 65 IP 66
Ingress protection (control gear) IP 65 IP 65
Class I & II I & II
Impact resistance (shock-resistant PMMA) IK 10
IK 10 (with bowl)
IK 06 (lenses)
Max. weight with control gear:
HARMONY D10 & D8 S 10 kg 13 kg
HARMONY D10 & D8 S + CS 11 kg 14 kg
HARMONY D10 & D8 + LYRE P 16 kg 19 kg
HARMONY D10 & D8 + LYRE P + CS 17 kg 20 kg
SCx: HARMONY D10 & D8 S 0.18 m² 0.18 m²
HARMONY D10 & D8 + LYRE P 0.225 m² 0.225 m²
Technical information • page 227