Classical & Heritage lighting - Indal

Bir-Hakeim
versions & Dimensions
765
765
495
495
BIR-HAKEIM
BIR-HAKEIM
CL58
CL58
S
S
MATERIALS
lyre connector
crown
canopy crown
beaded chain
1200
1200
495
495
BIR-HAKEIM
BIR-HAKEIM
CL58
CL58
+ LYRE
+ LYRE
S
S
canopy
frame
- Housing in two materials copper & bronze:
. canopy in copper.
. lyre connector, crown, canopy crown, frame and beaded chain in bronze.
. lyre in metallised steel.
- Control gear mounting plate in galvanised steel.
- Reflectors in bright dipped anodised stamped aluminium.
- Bowl in shock-resistant polymethacrylate (PMMA).
- Luminaire gasket in EPDM.
FINISHES
- Steel: polyester powder coating finish in RAL or Futura Akzo Nobel colours.
- Copper & bronze: untreated; antique patinated; varnished antiqued;
clear varnished.
- Clear bowl.
> Materials & finishes on p. 206
lyre
bowl
MOUNTING
- Suspended mounting using a threaded spigot in galvanised steel
Ø 27 pdg (3/4’’ G).
- Suspended lyre mounting using a screwed fitting in galvanised steel
Ø 34 pdg (1’’ G).
> Luminaire mounting on p. 269
Installation & maintenance
- Luminaire opening by using one M6 HSHC screw located between the
frame and the canopy crown. The luminaire is opened by rotating the
frame around a cast iron hinge connecting the canopy to the frame.
- Luminaire maintains in open position by means of a leaf spring.
- Electrical connection by terminal strip for a flexible power cable with
3G 2.5 maximum cross-sectional area.
- Lamp access after opening the luminaire. Unlocked manually by opening
the cams for RFC, using two clips for Vectra 1 or one clip for ExaCT
Performer.
- Control gear access after opening the luminaire. Mounting plate unlocked
by opening the cams for RFC, two M6 Torx screws for Vectra 1 and ExaCT
Performer.
- Bowl replacement (including reflector) directly after opening the
luminaire, the reflector being held by clamps.
Mechanical and electrical specifications
Ingress protection (optic) IP 66
Ingress protection (control gear) IP 55
Class
I & II
Impact resistance (shock-resistant PMMA) IK 10
Max. weight with control gear
24 kg
SCx 0.16 m²
RECYCLING
The housing of the luminaire (excluding the optical unit) is assembled
without glue, which makes recycling easier.
Classical & Heritage • page 212