this SIM5218 AT command manual - Cooking Hacks

SIM5218 Serial AT Command Set
Destination-Address, Address-Value field in string format; BCD numbers (or GSM 7 bit default
alphabet characters) are converted to characters of the currently selected TE character set, type of
address given by .
Integer type value indicating in the text mode (AT+CMGF=1) the length of the message body
> (or ) in characters; or in PDU mode (AT+CMGF=0), the length of the actual TP
data unit in octets. (i.e. the RP layer SMSC address octets are not counted in the length).
TP-Destination-Address, Type-of-Address octet in integer format. (when first character of is +
(IRA 43) default is 145, otherwise default is 129). The range of value is from 128 to 255.
Content of message.
Content of message.
NOTE In text mode, the maximum length of an SMS depends on the used coding scheme: It is 160
characters if the 7 bit GSM coding scheme is used.
Examples
AT+CMGSO="10086","YECX"
+CMGSO: 128
OK
6.22 AT+CMGWO Write message to memory quickly
Description
The command stores message (either SMS-DELIVER or SMS-SUBMIT) to memory storage
. But it’s different from AT+CMGW. This command only need one time input, and wait for
“>” needless.
SIM PIN
YES
References
Vendor
Syntax
Test Command
AT+CMGWO=
Write Command
If text mode (AT+CMGF=
1):
AT+CMGWO=[,],
Responses
OK
Responses
+CMGWO:
OK
ERROR
SIM5218_Serial _ATC_V1.36 114
5/15/2012