this SIM5218 AT command manual - Cooking Hacks

SIM5218 Serial AT Command Set
OK
21.1.9 AT+SMTPSEND Initiate session and send e-mail
Description
The asynchronous command is used to initiate TCP session with SMTP server and send an e-mail
after all mandatory parameters have been set correctly. After SMTP client has connected with
specified SMTP server and SMTP client receives an indication that indicates SMTP server is
working well, the command will return “+SMTP: OK”, but it doesn’t indicate that the e-mail is
already sent successfully.
After the e-mail is sent and the session is closed, an Unsolicited Result Code (URC) will be
returned to TE, “+SMTP: SUCCESS” indicates the e-mail is sent successfully, and other URCs
indicate an failed result and the session is closed.
SIM PIN References
YES Vendor
Syntax
Test Command
AT+SMTPSEND=
Read Command
AT+SMTPSEND
Execution Command
AT+SMTPSEND
Responses
OK
Responses
+SMTPSEND:
OK
Responses
OK
+SMTP: OK
+SMTP:
+SMTP: OK
+SMTP:
OK
+SMTP:
ERROR
Defined values
Whether or not an e-mail is sent in process. If the process of sending an e-mail is ongoing, SMTP
client can’t send the e-mail again.
0 – Not ongoing.
SIM5218_Serial _ATC_V1.36 414
5/15/2012