this SIM5218 AT command manual - Cooking Hacks

SIM5218 Serial AT Command Set
OK
AT+VPSOURCE=3, “video_0.mp4”
OK
5.6 AT+VPRECORD Record video during video call
Description
Both far-end and near-end video can be recorded in MP4 format during a video call. File name will
be generated automatically based on system time of the Module, and the format is YYYYMMDD_
HHMMSS_f.mp4 and YYYYMMDD_HHMMSS_n.mp4.
YYYYMMDD_HHMMSS_f.mp4 denotes that video recorded is from other side.
YYYYMMDD_HH MMSS_n.mp4 denotes that video recorded is transmitted to remote party.
The storage location of files refers to AT+FSLOCA (=1/2/3).
NOTE The maximal number of video frames that can be recorded is 54000 frames which
corresponds to one hour if FPS is 15. If maximal number is reached, “VP MP4 REACH TIME”
will be reported. If memory for recording video is not enough, “VP MP4 NO MEMORY” will be
reported.
SIM PIN References
YES Vendor
Syntax
Test Command
AT+VPRECORD=
Write Command
AT+VPRECORD=
Responses
+VPRECORD:(list of supported s)
OK
Responses
OK
Defined values
0 – not record video.
1 – only record far-end video.
2 – only record near-end video.
3 – record both far-end and near-end.
4 – record far-end video and send data to host by diag port.
5 – record near-end video and send data to host by diag port.
Examples
AT+VPRECORD=1
OK
SIM5218_Serial _ATC_V1.36 80
5/15/2012