this SIM5218 AT command manual - Cooking Hacks

SIM5218 Serial AT Command Set
28.7.1 File received from PC host
Step1. Set file name and storage place
Firstly, it must set file name and storage place in file system of module by one of following methods:
1. Select directory as current directory by AT+FSCD, and then set file name and storage place as
current directory with parameter of AT+CRXFILE is 0 or omitted. [Figure 17-9]
Figure 17-9 Set file name and storage place
2. Set storage place directly with parameter of AT+CTXFILE is not 0 and not omitted;
this method is a shortcut method for limited directories.
Step2. Open “Send File” dialog box
After set file name and storage place successfully, use “Transfer>Send File…” menu to open “Send
File” dialog box in HyperTerminal. [Figure 17-10]
SIM5218_Serial _ATC_V1.36 520
5/15/2012