this SIM5218 AT command manual - Cooking Hacks

SIM5218 Serial AT Command Set
Parameter specifies the password used for authentication. It is required for the authentication types
PAP and CHAP.
Parameter specifies the user name used for authentication. It is required for the authentication type
PAP.
The maximum length of the password.
The maximum length of the user name.
Examples
AT+CSOCKAUTH=
+CSOCKAUTH: (1-16),(0-2),132,132
OK
AT+CSOCKAUTH=1,1,”SIMCOM”,”123”
OK
19.4 AT+CGSOCKQREQ Quality of service profile (requested)
Description
The command allows the TE to specify a Quality of Service Profile that is used when the MT sends
an Activate PDP Context Request message to the network.. A special form of the set command
(AT+CGSOCKQREQ=) causes the requested profile for context number to become
undefined.
This command only affects the embedded socket related PDP context definition (refer to
AT+CGSOCKCONT).
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command
AT+CGSOCKQREQ=
Responses
+CGSOCKQREQ: , (list of supported s),
(list of supported s), (list of supported s) , (list
of supported s), (list of supported s) [
+CGSOCKQREQ: , (list of supported s),
(list of supported s), (list of supported s) , (list
of supported s), (list of supported s)
[…]]
OK
ERROR
SIM5218_Serial _ATC_V1.36 350
5/15/2012