this SIM5218 AT command manual - Cooking Hacks

SIM5218 Serial AT Command Set
8 Audio Application Commands
8.1 AT+CQCPREC Start recording sound clips
Description
The command is used to start recording sound clip. The name of audio file will be generated
automatically based on system time [refer AT+CCLK], and the storage location of audio file refers
to AT+FSLOCA.
NOTE: If recording during a call, the will set automatically refer to the call vocoder.
SIM PIN References
NO Vendor
Syntax
Test Command
AT+CQCPREC=
Write Command
AT+CQCPREC=,<
format>,[]
Responses
+CQCPREC: (list of supported s), (list of supported
s), (list of supported s)
OK
Responses
+AUDIOSTATE: audio record
OK
ERROR
Defined values
0 – local path
1 – remote path
Format of the audio file:
amr – AMR format
qcp – QCP format
Audio file format type:
10 – 4.75kbit/s AMR type QCP format
11 – 5.15kbit/s AMR type QCP format
12 – 5.9kbit/s AMR type QCP format
SIM5218_Serial _ATC_V1.36 134
5/15/2012