this SIM5218 AT command manual - Cooking Hacks

SIM5218 Serial AT Command Set
SIM PIN
YES
References
Vendor
Syntax
Test Command
AT+CIPSEND =
Responses
+CIPSEND: (list of supported s), (list of supported <
length >s)
OK
+IP ERROR:
ERROR
+CME ERROR:
Read Command
AT+CIPSEND
Write Command
AT+CIPSEND=,
data for send
Responses
OK
+CME ERROR:
Responses
OK
+CIPSEND: ,
(This format is for TCP
connect)
AT+CIPSEND=,
,,data for send
(This format is for UDP
connect)
If sending successfully(tcp connect):
Send ok
+IP ERROR:
ERROR
+CME ERROR:
If sending successfully(udp sending):
OK
+CIPSEND: ,
+IP ERROR:
ERROR
+CME ERROR:
Defined values
a numeric parameter that identifies a connection. the range of permitted values is 0 to 9.
a numeric parameter which indicates the length of sending data, it must be between1 and 1024.
A string parameter that identifies the IP address of server.The IP address format consists of 4
octets,separated by decimal point:”AAA.BBB.CCC.DDD”.In the latest software version,it already
Supports DNS query,so it may be a string like “www.google.cn.”.
SIM5218_Serial _ATC_V1.36 381
5/15/2012