this SIM5218 AT command manual - Cooking Hacks

SIM5218 Serial AT Command Set
Defined values
String with double quotes, file name which is received from PC host. If the file path contains
non-ASCII characters, the file path parameter should contain a prefix of {non-ascii}.
Specify storage location of file which is received from PC host. If this parameter is omitted, it will
save the file to current directory [refer AT+FSCD]
0 – save file received from PC host to current directory; before AT+CTXFILE execution, it
needs to set current directory [refer AT+FSCD]
Examples
AT+CRXFILE=”image_8.jpg”,0
OK
……
AT+FSCD=C:/
+FSCD: C:/
OK
AT+CRXFILE=”video.mp4”
OK
….
15.3 AT+CMWAIT config the waiting seconds before xmodem start
receiving
Description
This command is used to config the waiting seconds when setup a xmodem receiving task. Set to
zero means no wait and start receive process. Ought to be used together with +CRXFILE command.
SIM PIN
NO
References
Vendor
Syntax
Test Command
Responses
AT+CMWAIT= +CMWAIT: (0-60)
OK
Read Command
AT+CMWAIT
Responses
+CMWAIT:
OK
SIM5218_Serial _ATC_V1.36 289
5/15/2012