22.01.2015 Views

this SIM5218 AT command manual - Cooking Hacks

this SIM5218 AT command manual - Cooking Hacks

this SIM5218 AT command manual - Cooking Hacks

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>SIM5218</strong> Serial <strong>AT</strong> Command Set<br />

27 Result codes<br />

27.1 verbose code and numeric code<br />

Verbose result code Numeric (V0 set) Description<br />

OK 0 Command executed, no errors, Wake up after reset<br />

CONNECT 1 Link established<br />

RING 2 Ring detected<br />

NO CARRIER 3 Link not established or disconnected<br />

ERROR 4 Invalid <strong>command</strong> or <strong>command</strong> line too long<br />

NO DIALTONE 6 No dial tone, dialing impossible, wrong mode<br />

BUSY 7 Remote station busy<br />

NO ANSWER 8 Connection completion timeout<br />

27.2 Response string of <strong>AT</strong>+CEER<br />

Number<br />

Response string<br />

CS internal cause<br />

0 Phone is offline<br />

21 No service available<br />

25 Network release, no reason given<br />

27 Received incoming call<br />

29 Client ended call<br />

34 UIM not present<br />

35 Access attempt already in progress<br />

36 Access failure, unknown source<br />

38 Concur service not supported by network<br />

29 No response received from network<br />

45 GPS call ended for user call<br />

46 SMS call ended for user call<br />

47 Data call ended for emergency call<br />

48 Rejected during redirect or handoff<br />

100 Lower-layer ended call<br />

101 Call origination request failed<br />

102 Client rejected incoming call<br />

103 Client rejected setup indication<br />

104 Network ended call<br />

105 No funds available<br />

106 No service available<br />

<strong>SIM5218</strong>_Serial _<strong>AT</strong>C_V1.36 502<br />

5/15/2012

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!