this SIM5218 AT command manual - Cooking Hacks

SIM5218 Serial AT Command Set
The command is used to manage password for some AT commands.
SIM PIN
NO
References
Vendor
Syntax
Write Command
AT+CPASSMGR=, ""[,
]
Responses
OK
ERROR
Defined values
The module for the password operation:
"cplmnwlist" – AT+CPLMNWLIST command
The password for the module. The maximum length is 8.
The new password for the module. The maximum length is 8.
Examples
AT+CPASSMGR=”cplmnwlist”, “”, “12345678”
OK
AT+CPASSMGR=”cplmnwlist”, “12345678”, “111111”
OK
AT+CPASSMGR=”cplmnwlist”,”111111”
OK
AT+CPASSMGR=”cplmnwlist”,”111111”,””
OK
9.32 AT+CNSVSQ Network band scan quickly
Description
The command is used to perform a quick survey through channels belonging to the band selected,
starting from channel to channel . If parameters are omitted, a full band scan is performed.
After issuing the command, the information for every received BCCH(BCCH-Carrier and non
BCCH-Carrier) is given in the format of string.
Note: This command is not supported in WCDMA mode.
SIM PIN References
SIM5218_Serial _ATC_V1.36 187
5/15/2012