this SIM5218 AT command manual - Cooking Hacks

SIM5218 Serial AT Command Set
0 – Disable STK
1 – Enable STK
Examples
AT+STK=1
OK
21 Internet Service Command
21.1 Simple mail transfer protocol service
21.1.1 AT+SMTPSRV SMTP server address and port number
Description
The synchronous command is used to set SMTP server address and server’s port number. SMTP
client will initiate TCP session with the specified server to send an e-mail. If the process of sending
an e-mail is ongoing, the command will return “ERROR” directly.
Read command returns current SMTP server address and port number.
Execution command will clear SMTP server address and set the port number as default value.
NOTE After an e-mail is sent successfully or unsuccessfully, SMTP server address and port
number won’t be cleared.
SIM PIN References
YES Vendor
Syntax
Test Command
AT+SMTPSRV=
Read Command
AT+SMTPSRV
Write Command
AT+SMTPSRV=
[, ]
Execution Command
AT+SMTPSRV
Responses
+SMTPSRV: (list of supported s)
OK
Responses
+SMTPSRV: ,
OK
Responses
OK
Responses
OK
Defined values
SIM5218_Serial _ATC_V1.36 404
5/15/2012