this SIM5218 AT command manual - Cooking Hacks

SIM5218 Serial AT Command Set
delivery at the other SAP,in milliseconds.
0 – subscribed value
10…150 – value needs to be divisible by 10 without remainder
200…950 – value needs to be divisible by 50 without remainder
1000…4000 – value needs to be divisible by 100 without remainder
This parameter specifies the relative importance for handling of all SDUs belonging to the UMTS
Bearer compared to the SDUs of the other bearers.
0 – subscribed value
1 –
2 –
3 –
(Packet Data Protocol type) a string parameter which specifies the type of packet data protocol.
IP Internet Protocol
PPP Point to Point Protocol
IPV6 Internet Protocol Version 6
Examples
AT+CGSOCKEQREQ
+CGSOCKEQREQ:
OK
AT+CGSOCKEQREQ =
+CGSOCKEQREQ: "IP",(0-4),(0-384),(0-384),(0-384),(0-384),(0-2),(0-1520),("0E0","1E1"
,"1E2","7E3","1E3","1E4","1E5","1E6"),("0E0","5E2","1E2","5E3","4E3","1E3","1E4"
,"1E5","1E6","6E8"),(0-3),(0,100-4000),(0-3)
+CGSOCKEQREQ: "PPP",(0-4),(0-384),(0-384),(0-384),(0-384),(0-2),(0-1520),("0E0","1E1
","1E2","7E3","1E3","1E4","1E5","1E6"),("0E0","5E2","1E2","5E3","4E3","1E3","1E4
","1E5","1E6","6E8"),(0-3),(0,100-4000),(0-3)
+CGSOCKEQREQ: "IPV6",(0-4),(0-384),(0-384),(0-384),(0-384),(0-2),(0-1520),("0E0","1E
1","1E2","7E3","1E3","1E4","1E5","1E6"),("0E0","5E2","1E2","5E3","4E3","1E3","1E
4","1E5","1E6","6E8"),(0-3),(0,100-4000),(0-3)
OK
19.6 AT+CGSOCKQMIN Quality of service profile (minimum
acceptable)
Description
The command allows the TE to specify a minimum acceptable profile which is checked by the MT
against the negotiated profile returned in the Activate PDP Context Accept message.A special form
of the set command,AT+CGSOCKQMIN= causes the minimum acceptable profile for context
SIM5218_Serial _ATC_V1.36 357
5/15/2012