this SIM5218 AT command manual - Cooking Hacks

SIM5218 Serial AT Command Set
Integer type, max length of password.
Examples
AT+CPWD=
+CPWD: ("AB",4),("AC",4),("AG",4),("AI",4),("AO",4),("IR",4),("OI",4),("OX",4),(
"SC",8),("P2",8)
OK
9.5 AT+CLIP Calling line identification presentation
Description
The command refers to the GSM/UMTS supplementary service CLIP (Calling Line Identification
Presentation) that enables a called subscriber to get the calling line identity (CLI) of the calling
party when receiving a mobile terminated call.
Write command enables or disables the presentation of the CLI at the TE. It has no effect on the
execution of the supplementary service CLIP in the network.
When the presentation of the CLI at the TE is enabled (and calling subscriber allows), +CLIP:
,,,[,[][,]] response is returned after every RING (or
+CRING: ; refer sub clause "Cellular result codes +CRC") result code sent from TA to TE. It
is manufacturer specific if this response is used when normal voice call is answered.
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command
AT+CLIP=
Read Command
AT+CLIP
Responses
+CLIP: (list of supported s)
OK
Responses
+CLIP: ,
OK
ERROR
+CME ERROR:
Write Command
AT+CLIP=
Execution Command
Responses
OK
ERROR
+CME ERROR:
Responses
SIM5218_Serial _ATC_V1.36 152
5/15/2012