this SIM5218 AT command manual - Cooking Hacks

SIM5218 Serial AT Command Set
AT+SMTPSUB
OK
Defined values
E-mail subject, string with double quotes, and ASCII text up to 512 characters. will be
present in the header of the e-mail sent by SMTP client in the field: “Subject: ”. For write
command, if the subject contains non-ASCII characters, this parameter should contain a prefix of
{non-ascii}.
Examples
AT+SMTPSUB
+SMTPSUB: “”
OK
AT+SMTPSUB=”THIS IS A TEST MAIL”
OK
AT+SMTPSUB={non-ascii}”E6B58BE8AF95E982AEE4BBB6”
OK
AT+SMTPSUB
+SMTPSUB: “THIS IS A TEST MAIL”
OK
21.1.6 AT+SMTPBODY E-mail body
Description
The command is used to set e-mail body, which will be sent to SMTP server with text format.
Read command returns current e-mail body. If the process of sending an e-mail is ongoing, the
command will return “ERROR” directly.
Execute command will switch the serial port from command mode to data mode, so TE can enter
more ASCII text as e-mail body (up to 5120), and CTRL-Z (ESC) is used to finish (cancel) the
input operation and switch the serial port back to command mode.
NOTE After an e-mail is sent successfully, the body will be cleared, if unsuccessfully, it won’t be
cleared. When execute command AT+SMTPBODY, and display “>”, the prevenient body will be
cleared.
SIM PIN References
YES Vendor
Syntax
Test Command
AT+SMTPBODY=
Responses
OK
SIM5218_Serial _ATC_V1.36 410
5/15/2012