this SIM5218 AT command manual - Cooking Hacks

SIM5218 Serial AT Command Set
YES
Vendor
Syntax
Test Command
Responses
AT+CFTPSGETFILE= +CFTPSGETFILE: [{non-ascii}]“FILEPATH”, (0-8)
OK
Write Command
Responses
AT+CFTPGETFILE= OK
“”,
+CFTPSGETFILE: 0
+CFTPSGETFILE:
ERROR
ERROR
OK
+CFTPSGETFILE:
Defined values
The remote file path. When the file path doesn’t contain ”/”, this command transfers file from the
current remote FTPS directory. If the file path contains non-ASCII characters, the file path
parameter should contain a prefix of {non-ascii}.
The directory to save the downloaded file:
0 – current directory [refer to AT+FSCD]
1 – “C:/Picture” directory
2 – “C:/Video” directory
3 – “C:/VideoCall” directory
4 – “D:/Picture” directory
5 – “D:/Video” directory
6 – “D:/VideoCall” directory
7 – “C:/Audio” directory
8 – “D:/Audio” directory
The error code of FTPS operation.
Examples
AT+CFTPSGETFILE=”/pub/mydir/test1.txt”,1
OK
…
+CFTPSGETFILE: 0
AT+CFTPSGETFILE=” test2.txt”,2
SIM5218_Serial _ATC_V1.36 455
5/15/2012