this SIM5218 AT command manual - Cooking Hacks

SIM5218 Serial AT Command Set
The user password for FTP server access. The maximum length is 40 bytes.
Examples
AT+CFTPPW=”mypass”
OK
AT+CFTPPW
+CFTPPW: “mypass”
OK
AT+CFTPPW=
+CFTPPW: ”mypass”
OK
21.3.7 AT+CFTPGETFILE Get a file from FTP server to EFS
Description
The command is used to download a file from FTP server to module EFS.
SIM PIN
YES
References
Vendor
Syntax
Test Command
AT+CFTPGETFILE=
Write Command
AT+CFTPGETFILE=
“”,[,]
Responses
+CFTPGETFILE: [{non-ascii}]“FILEPATH”, (list of supported
s) [, (list of supported s)]
OK
Responses
OK
+CFTPGETFILE: 0
+CME ERROR
OK
+CFTPGETFILE:
Defined values
The remote file path. When the file path doesn’t contain ”/”, this command transfers file from the
current remote FTP directory. If the file path contains non-ASCII characters, the file path parameter
should contain a prefix of {non-ascii}.
The directory to save the downloaded file (For SIM5320, Only 0 is valid):
0 – current directory [refer to AT+FSCD]
SIM5218_Serial _ATC_V1.36 432
5/15/2012