this SIM5218 AT command manual - Cooking Hacks

SIM5218 Serial AT Command Set
OK
…
+CFTPSGETFILE: 0
AT+CFTPSGETFILE={non-ascii}” B2E2CAD42E747874”,2
OK
…
+CFTPSGETFILE: 0
AT+CFTSPGETFILE=
+CFTPSGETFILE: [{non-ascii}]“FILEPATH”,(0-8)
OK
21.6.13 AT+CFTPSPUTFILE Put a file in module EFS to FTPS server
Description
The command is used to upload a file in the module EFS to FTPS server.
SIM PIN
YES
References
Vendor
Syntax
Test Command
Responses
AT+CFTPSPUTFILE= +CFTPSPUTFILE: [{non-ascii}] “FILEPATH”, (0-8)
OK
Write Command
Responses
AT+CFTPSPUTFILE= OK
“”,
+CFTPSPUTFILE: 0
+CFTPSPUTFILE:
ERROR
ERROR
OK
+CFTPSPUTFILE:
Defined values
The remote file path. When the file path doesn’t contain “/”, this command transfers file to the
current remote FTPS directory. If the file path contains non-ASCII characters, the file path
parameter should contain a prefix of {non-ascii}.
The directory that contains the file to be uploaded:
0 – current directory [refer to AT+FSCD]
1 – “C:/Picture” directory
SIM5218_Serial _ATC_V1.36 456
5/15/2012