this SIM5218 AT command manual - Cooking Hacks

SIM5218 Serial AT Command Set
set current directory D:/ after formatting.
SIM PIN
NO
References
Vendor
Syntax
Test Command
AT+FSFMT=
Execution Command
AT+FSFMT
Responses
OK
Responses
OK
Examples
AT+FSFMT
OK
14.10 AT+FSLOCA Select storage place
Description
The command is used to set the storage place for media files. If the storage card is not present, it
can not set storage place as storage card. When the Module is power on, the value of is 0.
NOTE
1. Static image taken by camera is stored in “C:/Picture” or “D:/Picture” directory.
2. Video file recorded by camera is stored in “C:/Video” or “D:/Video” directory.
3. Media file recorded during a video call is stored in “C:/VideoCall” or “D:/Videocall”
directory.
4. Audio file recorded is stored in “C:/Audio” or “D:/Audio” directory.
SIM PIN References
NO Vendor
Syntax
Test Command
AT+FSLOCA=
Read Command
AT+FSLOCA
Write Command
Responses
+FSLOCA: (list of supported s)
OK
Responses
+FSLOCA:
OK
Responses
SIM5218_Serial _ATC_V1.36 283
5/15/2012