this SIM5218 AT command manual - Cooking Hacks

SIM5218 Serial AT Command Set
DIRECTORY NOT EXISTED
FORBID CREATE DIRECTORY UNDER \"C:/\"
FORBID DELETE DIRECTORY
INVALID PATH NAME
INVALID FILE NAME
SD CARD HAVE NO ENOUGH MEMORY
EFS HAVE NO ENOUGH MEMORY
FILE CREATE ERROR
READ FILE ERROR
WRITE FILE ERROR
ERROR
Defined values
The sources file name or the whole path name with sources file name.
The destination file name or the whole path name with destination file name.
The percent of copy done. The range is 0.0 to 100.0
NOTE
1. The and should give the whole path and name, if only given file name, it
will refer to current path (AT+FSCD) and check the file’s validity.
2. If is a whole path and name, make sure the directory exists, make sure that the file
name does not exist or the file name is not the same name as the sub folder name,
otherwise return error.
3. report refer to the copy file size. The big file maybe report many times, and
little file report less.
Examples
AT+FSCOPY=D:/TESTFILE,D:/Video/COPYFILE
(Copy file TESTFILE on D:/ to D:/Video/COPYFILE)
+FSCOPY: 1.0
+FSCOPY: 9.7
+FSCOPY: 19.4
…
+FSCOPY: 100.0
OK
AT+FSCD
+FSCD: D:/
OK
AT+FSCOPY= C:/TESTFILE,COPYFILE (Copy file TESTFILE on C:/ to D:/COPYFILE)
+FSCOPY: 1.0
SIM5218_Serial _ATC_V1.36 285
5/15/2012