this SIM5218 AT command manual - Cooking Hacks

SIM5218 Serial AT Command Set
+CFTPSGET:[{non-ascii}] “FILEPATH”
OK
21.6.15 AT+CFTPSPUT Put a file to FTPS server
Description
This command is used to put a file to FTPS server through serial port. The
AT+CFTPSPUT=[“”,] is used to download the data to be sent. The
AT+CFTPSPUT is used to wait the result of sending.
SIM PIN References
YES Vendor
Syntax
Test Command
AT+CFTPSPUT=
Read Command
AT+CFTPSPUT
Write Command
AT+CFTPSPUT=[“”,]
Execute Command
AT+CFTPSPUT
Responses
+CFTPSPUT: [{non-ascii}]"FILEPATH"
OK
Responses
+CFTPSPUT:
OK
Responses
>
OK
+CFTPSPUT:
ERROR
ERROR
Responses
OK
+CFTPSPUT:
ERROR
Defined values
The path of the file on FTPS server.
The length of the data in the sending buffer which is waiting to be sent.
The length of the data to send, the maximum length is 512.
The final result of the sending.
SIM5218_Serial _ATC_V1.36 459
5/15/2012