this SIM5218 AT command manual - Cooking Hacks

SIM5218 Serial AT Command Set
- CELL_LOW_PRIORITY indicates the cell is low priority based on the system information
received.
- CELL_FORBIDDEN indicates the cell is forbidden.
- CELL_BARRED indicates the cell is barred based on the system information received.
- CELL_LOW_LEVEL indicates the cell RXLEV is low.
- CELL_OTHER indicates none of the above, e.g. exelusion timer running, no BCCH available
etc.
number of valid channels.
list arfcns BCCH allocation, and the total number is .
number of valid channels.
list channels, and the total number is .
Examples
AT+CNSVUN=16,20,86,96,109
Network survey started...
For BCCH-Carrier:
14,51, -89, 460, 0, 6180, 41074,0, 8, 5 7 14 51 61 65 74 88, 24, 2 3 9 11 12 15 16 17 19 20 22 24 25
26 27 28 36 81 516 520 525 532 556 600
For non BCCH-Carrier:
86, -97
Network survey end
OK
9.37 AT+CCGMDF Enable single mode in RAT balancing mode
Description
The command is used to enable or disable single mode in RAT balancing mode. This command is
used for test purpose only. The default setting of RAT balancing depends on EF-RAT, and usually it
is “Dual Mode”. After calling AT+CCGMDF=1 and AT+CNMP=13 or 14, the mode can be
changed to single mode.
SIM PIN References
YES Vendor
Syntax
Test Command
Responses
AT+CCGMDF= +CCGMDF: (0,1)
SIM5218_Serial _ATC_V1.36 198
5/15/2012