this SIM5218 AT command manual - Cooking Hacks

SIM5218 Serial AT Command Set
context is provided if known to the MT.
+CGEV: ME DEACT , , []
The mobile equipment has forced a context deactivation. The that was used to
activate the context is provided if known to the MT.
+CGEV: NW DETACH
The network has forced a Packet Domain detach. This implies that all active contexts
have been deactivated. These are not reported separately.
+CGEV: ME DETACH
The mobile equipment has forced a Packet Domain detach. This implies that all active
contexts have been deactivated. These are not reported separately.
+CGEV: NW CLASS
The network has forced a change of MS class. The highest available class is reported
(see AT+CGCLASS).
+CGEV: ME CLASS
The mobile equipment has forced a change of MS class. The highest available class is
reported (see AT+CGCLASS).
Examples
AT+CGEREP=
+CGEREP: (0-2),(0-1)
OK
AT+CGEREP
+CGEREP: 0,0
OK
18.14 AT+CGREG GPRS network registration status
Description
The command controls the presentation of an unsolicited result code “+CGREG: ” when
=1 and there is a change in the MT's GPRS network registration status.
The read command returns the status of result code presentation and an integer which shows
Whether the network has currently indicated the registration of the MT.
SIM PIN References
NO 3GPP TS 27.007
Syntax
Test Command
AT+CGREG=
Read Command
Responses
+CGREG: (list of supported s)
OK
Responses
SIM5218_Serial _ATC_V1.36 341
5/15/2012